This is an air control unit for use on all compressed air systems that operate from 150 PSI down.  The unit is complete with a filter, pressure regulator and lubricator.  All pieces are threaded in 1/2" NPT and may be adapted up or down for the individual system.  This unit can be mounted at the compressor or when different requirements exists in the same shop a unit can be mounted at each work area.  The unit is complete and ready to assemble.  The unit works from 150 PSI DOWN  and up to 140 degrees Fahrenheit.
THE FILTER -  is used to remove impurities in compressed air systems.  Things such as water, dirt, rust and other airborne.  Solids that ruin hoses and affect the life of tools.
THE REGULATOR - is used to control the air pressure.  Different tools require different working pressures.  But, all tools have a maximum operating  pressure and this keeps you below it.  It also prevents air surges in the line, which is a major factor in paint spraying.
THE LUBRICATOR - holds 5.5 ounces of air tool oil, and by filling this the air picks up the oil and feeds it through the lines to all the tools.  Helps keep the tools oiled and the maintenance down.